Acid and alkali resistant magnetic pump to extend the life of the method?

Acid and alkali resistant magnetic pump to make the life-extension method? I believe that many people have questions, today I will answer with you! We can use the acid and alkali resistant magnetic pump it is a new type of pump using the magnetic force of the permanent magnet to achieve non-contact transmission of torque, that is, when the motor drives the outer rotor (i.e. outer magnet) assembly rotation, the magnetic lines of force through the magnetic field drive the inner rotor (i.e. inner magnet) assembly and impeller synchronous rotation. The flow channels are all made of acid and alkali-resistant materials, which can convey corrosive media of any concentration (strength) such as acid, alkali, oxidizer, etc. The isolation sleeve is made of special materials with high strength and mechanical properties, which eliminates the magnetic vortex phenomenon in the acid and alkali-resistant magnetic pump. We need to use it correctly and maintain and service it regularly in order to prolong its service life.

Here is the list of contents

1. Start-up and shutdown of acid and alkali resistant magnetic pump

2. The safe shutdown of acid and alkali resistant magnetic pump

3. Emergency shutdown of acid and alkali resistant magnetic pump

4. Regular maintenance and repair of acid and alkali resistant magnetic pump

Start-up and shutdown of acid and alkali resistant magnetic pump

The equipment and equipment operators should clean all the debris before starting the machine to ensure the safety of the situation before starting the machine.

Before starting, we have to inject the liquid to be conveyed into the pump (in order to prevent dry grinding from idling), open the inlet valve, close the outlet gate valve, and turn on the power. Turn on the power and check whether the pump is rotating normally. After 5 minutes of trial operation, it should be put into operation in several groups, if there is any abnormal phenomenon, it should not be put into operation.

The safe shutdown of acid and alkali resistant magnetic pump

When we want to shut down to cut off the power supply before, should close the outlet gate valve.

Emergency shutdown of acid and alkali resistant magnetic pump

When an emergency occurs we have to stop the motor immediately before closing the outlet valve and the inlet valve.

Regular maintenance and repair of acid and alkali resistant magnetic pump

Acid and alkali resistant magnetic pump's pump body, motor, and other important parts should be checked and maintained regularly. Regularly clean the flow channel in the pump to ensure that there is no residual liquid; cut off the power supply with a dust cover and take good dustproof measures. Check the outlet and export to prevent foreign objects from entering the pump body and damaging it. Pay attention to the temperature of the transport medium normal temperature below 80 degrees, to prevent damage to the pump body seal ring at high temperature. For the acid and alkali resistant magnetic pump with a high head, it is recommended to install a check valve on the outlet pipeline to avoid damage caused by the sudden closing of the pipeline valve. When closing, close the first discharge valve and then cut off the pump power. Regularly go to check whether the power cord is waterlogged and whether the power cord is loose and falling off. Must be strictly in accordance with the direction of the start of the indicator plate rotation, counterclockwise rotation and idling are strictly prohibited. Pay attention to wearing parts, wear or damage.

Taicang magnetic pump Co., Ltd. was born in 1979. It cooperated with Shanghai Chemical Design Institute to form a unique core research project with magnetic drive pump, and achieved great success. It has become the first company in China to comprehensively design and produce magnetic drive pump. Today, Taicang magnetic pump Co., Ltd. has become a leading manufacturer of magnetic drive pumps in China, with many patents and 12 utility model patents.