Installation of leak-free magnetic pump

The magnetic pump is a leak-free fluid conveying machine without a dynamic seal. So as to solve the problems of "running, emitting, dripping and leakage" in traditional oil transportation in the industry "A series of problems. It is widely used in the production processes of chemical, petrochemical, metallurgy, pharmacy, printing, and dyeing, papermaking, electroplating, and other enterprises to transport corrosive or nonpolluting liquids with a relative density of less than 1.84 and a viscosity similar to water and free of iron filings impurities and solid particles. It is especially suitable for the transportation of flammable, explosive, volatile liquids and toxic and valuable media, and plays a great role in industrial transportation.

Below is a list of contents

What is a leak-free magnetic pump？

Precautions for installation of leak-free magnetic pump

It is forbidden to install a magnetic pump without leakage

What is a leak-free magnetic pump?

Leakage-free magnetic pump as a leakage-free transport pump, in order to avoid faults and ensure service life, it is undoubtedly necessary to master the correct operation method during installation to further strengthen the stability of transportation. Let me sort out some precautions during the installation of a leak-free magnetic pump as follows:

Precaution for installation of leak-free magnetic pump

1. The leakage-free magnetic pump shall be installed horizontally rather than vertically. For occasions where vertical installation is required, the motor must be upward.

2. When the suction liquid level is higher than the pump axis line, open the valve of the suction pipeline before starting.

3. The pump shall be checked before use. The fan blade of the motor shall rotate flexibly without jamming and abnormal sound, and all fasteners shall be fastened.

4. Check whether the rotation direction of the motor is consistent with the rotation mark of the magnetic pump.

5. After the motor is started, slowly open the discharge valve.

6. Before the pump stops working, close the discharge valve first, and then close the suction pipe valve.

It is forbidden to install a magnetic pump without leakage

1. Places where flammable gas, dust, or materials are used and stored.

2. Places where corrosive gases (chlorine or similar gases) are generated.

3. Places with extremely high ambient temperature (40p or higher) or extremely low temperature (0P or lower).

4. In places with great dust or humidity.

5. In the place of vibration.

The above introduces the installation precautions of the leakage-free magnetic pump. For the installation of a leakage-free magnetic pump, I still suggest that you arrange special personnel to operate, which can not only ensure the correctness of installation but also ensure the stable operation in the later stage.

Taicang magnetic pump Co., Ltd. was born in 1979. It cooperated with Shanghai Chemical Design Institute to form a unique core research project with magnetic drive pump, and achieved great success. It has become the first company in China to comprehensively design and produce magnetic drive pump. Today, Taicang magnetic pump Co., Ltd. has become a leading manufacturer of magnetic drive pumps in China, with many patents and 12 utility model patents.