Precautions for the operation of anti-corrosion magnetic pump

The anti-corrosion magnetic pump is suitable for conveying various acid-base and corrosive liquids. Although it has high safety standards, if there is an improper operation in the process of use, it will also affect the normal operation of the anti-corrosion magnetic pump. It can be seen that the precautions in operation are very important. Please summarize the following precautions for operation, which you can refer to according to your own situation.

Below is a list of contents

1. Idling of the pump is prohibited

2. Do not stand on the pump

3. Do not touch the pump

4. Starting of anti-corrosion magnetic pump

5. foreign body

6. Stop the pump for a long time

Idling of the pump is prohibited

Do not idle the pump (there is any liquid in the pump). If the pump is idled, when there is no liquid in the pump, the idling of the pump will cause the friction of parts in the pump to generate heat, which will damage the pump. When the suction valve is completely closed, making the pump work is also regarded as idling.

Do not stand on the pump

Never use the pump as a ladder under any circumstances. Otherwise, serious injury will be caused.

Do not touch the pump

When the liquid delivered by the pump is high-temperature liquid, the surface temperature of the pump and pipeline is very high. It is forbidden to touch the pump or pipeline by hand during the operation of the pump and immediately after the pump stops working.

Starting of anti-corrosion magnetic pump

When connecting the power supply of the pump, make sure there is no one near the pump. The pump itself has no on / off switch. When the power supply line of the pump is connected, the pump starts and starts working.

foreign body

If foreign matters enter the pump, cut off the power supply immediately and clean the blockage. Using the pump when there is foreign matter in the pump will cause damage or failure of the pump.

Stop the pump for a long time

When the pump is stopped for a long time, the liquid in the pump body shall be drained and cleaned. Take correct measures to prevent foreign matters from entering the pump body. If the pump is out of service for more than 1 year, replace the O-ring and check the inside of the pump body.

The above explains in detail the precautions in the operation of an anti-corrosion magnetic pump, which can be improved according to your own operation.

Taicang magnetic pump Co., Ltd. was born in 1979. It cooperated with Shanghai Chemical Design Institute to form a unique core research project with magnetic drive pump, and achieved great success. It has become the first company in China to comprehensively design and produce magnetic drive pump. Today, Taicang magnetic pump Co., Ltd. has become a leading manufacturer of magnetic drive pumps in China, with many patents and 12 utility model patents.