Various materials of fluoroplastic magnetic drive pump

With the rapid development of the plastic industry, the variety of plastic pumps is increasing, which is increasingly replacing other kinds of non-metallic pumps. Let's see the secret of the fluoroplastic magnetic drive pump!

Below is a list of contents

1. Fluoroplastic magnetic drive pump -- polytetrafluoroethylene propylene

2. Fluoroplastic magnetic drive pump --fluoroalloy

3. Fluoroplastic magnetic drive pump --polyvinylidene fluoride

4. Fluoroplastic magnetic drive pump -- soluble polytetrafluoroethylene

5. Fluoroplastic magnetic drive pump -- polytrifluorochloroethylene

Fluoroplastic magnetic drive pump -- polytetrafluoroethylene propylene

Poly (perfluoroethylene propylene) (FEP, F46) is a modified variety of polytetrafluoroethylene. It is copolymerized with tetrafluoroethylene and hexafluoropropylene by suspension method at 55 ~ 60 ℃, commonly known as F46. F46 has excellent mechanical properties, excellent chemical stability, weather resistance, electrical insulation and flame retardancy, low surface tension, and good adhesion with metal in a molten state. This material can be used for a long time at - 85 ~ 205 ℃. The service temperature of the pump made of this material can reach 150 ℃ (200 ℃).

Fluoroplastic magnetic drive pump - fluoroalloy

Fluorine alloy is prepared by physical method with the existing ultra-high molecular weight polytetrafluoroethylene propylene as the main raw material and directly mixed with tetrafluoroethylene and filler. It has the excellent properties of fluoroplastics, high-temperature resistance, corrosion resistance, good electrical insulation, and non-stick surface. The characteristics of fluoroplastic alloy are as follows: f50-1 has better high-temperature resistance and cheaper cost than F46; F50-2 has the excellent properties of polytetrafluoroethylene (F4) (it can be used for a long time at 250 ℃, resistant to various acids, alkalis, strong oxidants, and organic solvents, good electrical insulation, etc.), overcomes the disadvantages of poor cold fluidity and processability of F4, and can be sintered by hot pressing and cold pressing.

Fluoroplastic magnetic drive pump polyvinylidene fluoride

Polyvinylidene fluoride (PVDF) has excellent corrosion resistance and wear resistance. It is suitable for occasions where the temperature is lower than 150 ℃, but the price is relatively high. PVDF is prepared by free radical polymerization of vinylidene fluoride with a molecular weight of up to 10. With excellent mechanical properties, it is the product with the highest mechanical strength in fluoroplastics and has excellent chemical stability and weather resistance. It is characterized by outstanding corrosion resistance, impact resistance, aging resistance, and creep resistance. It can be formed by general thermoplastic processing methods, and its convenient processing performance is far inferior to that of other plastics. In addition to concentrated sulfuric acid, concentrated nitric acid, and a few organic solvents, it can resist more corrosive media. The wear resistance is second only to ultra-high molecular weight polyethylene (UHMWPE) and is better than other plastics. The temperature resistance is also high, and the service temperature of the pump made of this material can reach 120 ℃. PVDF plastic has good comprehensive properties.

Fluoroplastic magnetic drive pump -- soluble polytetrafluoroethylene

Soluble polytetrafluoroethylene (PFA) has the same temperature resistance range, mechanical properties, and corrosion resistance as F46.

Fluoroplastic magnetic drive pump -- polytrifluorochloroethylene

Polytrifluorochloroethylene (PCTFE), commonly known as F3, has good processability and corrosion resistance, but low-temperature resistance.

Excellent fluoroplastic magnetic drive pump body adopts imported PFA, PVDF, and ETFE raw materials, which are resistant to strong corrosion; Viton, PVDF, and NBR are used as sealing materials, which have strong corrosion resistance and moderate rubber elasticity, and will not age due to long service life, which will affect the sealing effect; 995 ceramics, carbon, SiC and are used as bearing materials. Ceramics can resist general corrosive liquids and SiC can resist high corrosive liquids. Newly upgraded self-circulation cooling structure, no leakage, corrosion resistance, high-temperature resistance, and low vibration. Taicang Magnetic Centrifugal Pump Co., Ltd. has been engaged in semiconductor, continuous electroplating, glass panel, PCB circuit board, waste gas, wastewater, and other industries for 19 years.