Views: 0 Author: Site Editor Publish Time: 2022-05-16 Origin: Site
Today's content is about the structure and principle of zcqf fluoroplastic self-priming Magnetic centrifugal pump so that you can have a full understanding of this pump.
Zcqf self-priming magnetic drive pump (hereinafter referred to as magnetic self-priming pump) is a new product that applies the working principle of permanent magnet coupling to centrifugal pumps. The fluoroplastic self-priming Magnetic centrifugal pump adopts the motor direct connection structure, which is supported by the middle support. The internal and external magnets are made of high-performance magnetic material "neodymium iron boron". The isolation sleeve is used to eliminate the magnetic eddy current loss of the general Magnetic centrifugal pump. The liquid part of the pump is fluoroplastic, but the shell is metal material, so the pump body is enough to bear the weight of the pipeline and withstand mechanical impact.
The driving device adopts the active magnet coupling, which is directly installed on the motor shaft, the pump chamber is completely closed, and the impeller on the rotor assembly is indirectly driven to rotate through magnetic coupling. The self-priming pump adopts the structure of an external mixing axial return pump body, which is composed of a liquid suction chamber, liquid storage chamber, volute, return hole, gas-liquid separation chamber, and other components. As the speed slows down, it leads to gas-water separation. The air is discharged from the liquid outlet of the pump, and the liquid returns to the pump through the water return hole. After multiple cycles, the air in the liquid inlet pipeline is discharged, so that a certain vacuum is formed in the pump to achieve self-priming. Application: applicable to petrochemical industry, acid and alkali making, non-ferrous metal smelting, pickling process of automobile manufacturing, rare earth separation, pesticide, dye, medicine, papermaking, electroplating, radio and other industries.
The magnetic self-priming pump replaces the dynamic seal with the static seal so that the overflow parts of the pump are completely sealed, which completely solves the unavoidable problems of running, emitting, and dripping the mechanical seal of other pumps. The Magnetic centrifugal pump adopts corrosion-resistant and high-strength reinforced polypropylene, tetrafluoroalloy, silicon nitride, carbon graphite, and steel jade ceramic magnet as the manufacturing material, and adopts the stainless steel connecting frame, It solves the problem that users often replace the connecting frame due to the corrosion of ambient air.
It not only has the function of a CQF magnetic drive pump but also integrates self-priming without a bottom valve and irrigation. It has good self-priming performance, short self-priming time, and high efficiency, and can operate without load without liquid. The self-priming height is 4m. Therefore, it has good corrosion resistance and can prevent the transmission medium from pollution.
Taicang magnetic centrifugal pump Co., Ltd. was born in 1979. It cooperated with Shanghai Chemical Design Institute to form a unique core research project with magnetic drive pump, and achieved great success. It has become the first company in China to comprehensively design and produce magnetic drive pump. Today, Taicang magnetic centrifugal pump Co., Ltd. has become a leading manufacturer of magnetic drive pumps in China, with many patents and 12 utility model patents.
