loading
| Availability: | |
|---|---|
| Quantity: | |
The pump's design conforms to ISO2858.
Overflow components are made of 304, 316, 316L, titanium etc. There is shaft coupling in the magnetic centrifugal pump. For reparation, disassemble shaft coupling and there is no need to disassemble pipes or motor.
Flow capacity: 1.5-4m3/h
High lift: 30-165m
Highest operating temperature: 400 ℃
Pressure 1.6MPa.
To transfer organic chemical medium or acid medium.
The chemical magnetic centrifugal pump has small flow capacity, but high lift. When flow changes, the pump's lift sustains. When transfer high temperature medium, there is no need for a cooling case.
1.With our own technology of hydraulic model, magnetic centrifugal pump's performance improves 3 % to 8 %.
2.The components for sliding bearing have a structure of double supporting and double-cover plate.
3.Sliding bearing, shaft sleeve, thrust bearing are pump's wearing parts. While being made of tungsten carbide, pump can operate stably for a long time. There is no need to replace these components.
4.Isolation sets are made of Hastelloy which has better corrosion resistance, pressure resistance and deformation resistance.
5.The company's original technology PEEK isolation sets with carbon fiber reinforced makes the metal magnetic pump without eddy current loss and achieves the same efficiency as the mechanical seal pump.
6.Impeller's channel is polished and grinded. This improves magnetic pump's performance by 3% to 12 %. With this improvement, the cost of pumps can be recovered within 2 to 3 years.
A magnetic centrifugal pump requires little to no maintenance to deliver long-term top performance, potentially for years at a time. It has no mechanical seal that must be replaced periodically, and it is resistant to chemicals, so it isn't susceptible to corrosion. Pump owners can enjoy years of maintenance-free operation from a magnetic centrifugal pump.
Performance Parameter Table | |||||||||
Type | Flow Rate m3/h | Head M | Rotational Speed r/min | Shaft Power Pa KW | Efficiency η % | NPSH | Motor Power KW | ||
Medium Density g/cm3 | |||||||||
1 | 1.35 | 1.85 | |||||||
IMC25-20-110L | 3 | 18 | 2900 | 0.57 | 26 | 2 | 802-2 1.1 | 802-2 1.1 | 802-2 1.1 |
IMC32-25-125L | 6 | 22 | 2900 | 0.70 | 40 | 3.5 | 90S-2 1.5 | 90S-2 1.5 | 90S-2 1.5 |
IMC40-32-150L | 1.5 | 30 | 2900 | 0.64 | 25 | 3.5 | 100L-2 3 | 100L-2 3 | 100L-2 3 |
IMC40-32-180L | 3 | 50 | 2900 | 1.7 | 25 | 3.5 | 112M-2 4 | 112M-2 4 | 112M-2 4 |
IMC40-32-220L | 4 | 90 | 2900 | 4.9 | 20 | 4.0 | 132S2-2 7.5 | 132S2-2 7.5 | 160M1-2 11 |
IMC40-32-250L | 4 | 110 | 2900 | 6.7 | 18 | 4.0 | 132S2-2 7.5 | 160M1-2 11 | 160M2-2 15 |
IMC40-32-315L | 4 | 165 | 2900 | 16.8 | 9 | 4.0 | 200L1-2 30 | 200L2-2 37 | 225M-2 45 |
The pump's design conforms to ISO2858.
Overflow components are made of 304, 316, 316L, titanium etc. There is shaft coupling in the magnetic centrifugal pump. For reparation, disassemble shaft coupling and there is no need to disassemble pipes or motor.
Flow capacity: 1.5-4m3/h
High lift: 30-165m
Highest operating temperature: 400 ℃
Pressure 1.6MPa.
To transfer organic chemical medium or acid medium.
The chemical magnetic centrifugal pump has small flow capacity, but high lift. When flow changes, the pump's lift sustains. When transfer high temperature medium, there is no need for a cooling case.
1.With our own technology of hydraulic model, magnetic centrifugal pump's performance improves 3 % to 8 %.
2.The components for sliding bearing have a structure of double supporting and double-cover plate.
3.Sliding bearing, shaft sleeve, thrust bearing are pump's wearing parts. While being made of tungsten carbide, pump can operate stably for a long time. There is no need to replace these components.
4.Isolation sets are made of Hastelloy which has better corrosion resistance, pressure resistance and deformation resistance.
5.The company's original technology PEEK isolation sets with carbon fiber reinforced makes the metal magnetic pump without eddy current loss and achieves the same efficiency as the mechanical seal pump.
6.Impeller's channel is polished and grinded. This improves magnetic pump's performance by 3% to 12 %. With this improvement, the cost of pumps can be recovered within 2 to 3 years.
A magnetic centrifugal pump requires little to no maintenance to deliver long-term top performance, potentially for years at a time. It has no mechanical seal that must be replaced periodically, and it is resistant to chemicals, so it isn't susceptible to corrosion. Pump owners can enjoy years of maintenance-free operation from a magnetic centrifugal pump.
Performance Parameter Table | |||||||||
Type | Flow Rate m3/h | Head M | Rotational Speed r/min | Shaft Power Pa KW | Efficiency η % | NPSH | Motor Power KW | ||
Medium Density g/cm3 | |||||||||
1 | 1.35 | 1.85 | |||||||
IMC25-20-110L | 3 | 18 | 2900 | 0.57 | 26 | 2 | 802-2 1.1 | 802-2 1.1 | 802-2 1.1 |
IMC32-25-125L | 6 | 22 | 2900 | 0.70 | 40 | 3.5 | 90S-2 1.5 | 90S-2 1.5 | 90S-2 1.5 |
IMC40-32-150L | 1.5 | 30 | 2900 | 0.64 | 25 | 3.5 | 100L-2 3 | 100L-2 3 | 100L-2 3 |
IMC40-32-180L | 3 | 50 | 2900 | 1.7 | 25 | 3.5 | 112M-2 4 | 112M-2 4 | 112M-2 4 |
IMC40-32-220L | 4 | 90 | 2900 | 4.9 | 20 | 4.0 | 132S2-2 7.5 | 132S2-2 7.5 | 160M1-2 11 |
IMC40-32-250L | 4 | 110 | 2900 | 6.7 | 18 | 4.0 | 132S2-2 7.5 | 160M1-2 11 | 160M2-2 15 |
IMC40-32-315L | 4 | 165 | 2900 | 16.8 | 9 | 4.0 | 200L1-2 30 | 200L2-2 37 | 225M-2 45 |
