loading
The pump's design conforms to ISO2858.
Overflow components are made of 304, 316, 316L, titanium etc. There is shaft coupling in the magnetic pump. For reparation, disassemble shaft coupling and there is no need to disassemble pipes or motor.
Flow capacity: 1.5-4m3/h
High lift: 30-165m
Highest operating temperature: 400 ℃
Pressure 1.6MPa.
To transfer organic chemical medium and oil.
The pump has small flow capacity, but high lift. When flow changes, the pump's lift sustains. When transfer high temperature medium, there is no need for a cooling case. The operating performance is improved 3 % to 8 % with our own technology of hydraulic model.
1.The components for sliding bearing have a structure of double supporting and double-cover plate.
2.Sliding bearing, shaft sleeve, thrust bearing are made of tungsten carbide. There is no need to replace these components.
3.Isolation sets are made of Hastelloy which has low magnetic permeability. With Hastelloy stretch forming, isolation sets have better corrosion resistance, pressure resistance and deformation resistance than those of welding.
4.The company's original technology PEEK isolation sets with carbon fiber reinforced makes the metal magnetic pump without eddy current loss and achieves the same efficiency as the mechanical seal pump.
5.Impeller's channel is polished and grinded. This improves pump's performance by 3% to 12 %. With this improvement, the cost of pumps can be recovered within 2 to 3 years.
The double protection anti-leakage magnetic pump can prevent the occurrence of safety accidents and reduce the responsibilities and losses of enterprises for environmental protection and safety.
Performance Parameter Table | |||||||||
Type | Flow Rate m3/h | Head M | Rotational Speed r/min | Shaft Power Pa KW | Efficiency η % | NPSH | Motor Power KW | ||
Medium Density g/cm3 | |||||||||
1 | 1.35 | 1.85 | |||||||
IMC25-20-110L | 3 | 18 | 2900 | 0.57 | 26 | 2 | 802-2 1.1 | 802-2 1.1 | 802-2 1.1 |
IMC32-25-125L | 6 | 22 | 2900 | 0.70 | 40 | 3.5 | 90S-2 1.5 | 90S-2 1.5 | 90S-2 1.5 |
IMC40-32-150L | 1.5 | 30 | 2900 | 0.64 | 25 | 3.5 | 100L-2 3 | 100L-2 3 | 100L-2 3 |
IMC40-32-180L | 3 | 50 | 2900 | 1.7 | 25 | 3.5 | 112M-2 4 | 112M-2 4 | 112M-2 4 |
IMC40-32-220L | 4 | 90 | 2900 | 4.9 | 20 | 4.0 | 132S2-2 7.5 | 132S2-2 7.5 | 160M1-2 11 |
IMC40-32-250L | 4 | 110 | 2900 | 6.7 | 18 | 4.0 | 132S2-2 7.5 | 160M1-2 11 | 160M2-2 15 |
IMC40-32-315L | 4 | 165 | 2900 | 16.8 | 9 | 4.0 | 200L1-2 30 | 200L2-2 37 | 225M-2 45 |
The pump's design conforms to ISO2858.
Overflow components are made of 304, 316, 316L, titanium etc. There is shaft coupling in the magnetic pump. For reparation, disassemble shaft coupling and there is no need to disassemble pipes or motor.
Flow capacity: 1.5-4m3/h
High lift: 30-165m
Highest operating temperature: 400 ℃
Pressure 1.6MPa.
To transfer organic chemical medium and oil.
The pump has small flow capacity, but high lift. When flow changes, the pump's lift sustains. When transfer high temperature medium, there is no need for a cooling case. The operating performance is improved 3 % to 8 % with our own technology of hydraulic model.
1.The components for sliding bearing have a structure of double supporting and double-cover plate.
2.Sliding bearing, shaft sleeve, thrust bearing are made of tungsten carbide. There is no need to replace these components.
3.Isolation sets are made of Hastelloy which has low magnetic permeability. With Hastelloy stretch forming, isolation sets have better corrosion resistance, pressure resistance and deformation resistance than those of welding.
4.The company's original technology PEEK isolation sets with carbon fiber reinforced makes the metal magnetic pump without eddy current loss and achieves the same efficiency as the mechanical seal pump.
5.Impeller's channel is polished and grinded. This improves pump's performance by 3% to 12 %. With this improvement, the cost of pumps can be recovered within 2 to 3 years.
The double protection anti-leakage magnetic pump can prevent the occurrence of safety accidents and reduce the responsibilities and losses of enterprises for environmental protection and safety.
Performance Parameter Table | |||||||||
Type | Flow Rate m3/h | Head M | Rotational Speed r/min | Shaft Power Pa KW | Efficiency η % | NPSH | Motor Power KW | ||
Medium Density g/cm3 | |||||||||
1 | 1.35 | 1.85 | |||||||
IMC25-20-110L | 3 | 18 | 2900 | 0.57 | 26 | 2 | 802-2 1.1 | 802-2 1.1 | 802-2 1.1 |
IMC32-25-125L | 6 | 22 | 2900 | 0.70 | 40 | 3.5 | 90S-2 1.5 | 90S-2 1.5 | 90S-2 1.5 |
IMC40-32-150L | 1.5 | 30 | 2900 | 0.64 | 25 | 3.5 | 100L-2 3 | 100L-2 3 | 100L-2 3 |
IMC40-32-180L | 3 | 50 | 2900 | 1.7 | 25 | 3.5 | 112M-2 4 | 112M-2 4 | 112M-2 4 |
IMC40-32-220L | 4 | 90 | 2900 | 4.9 | 20 | 4.0 | 132S2-2 7.5 | 132S2-2 7.5 | 160M1-2 11 |
IMC40-32-250L | 4 | 110 | 2900 | 6.7 | 18 | 4.0 | 132S2-2 7.5 | 160M1-2 11 | 160M2-2 15 |
IMC40-32-315L | 4 | 165 | 2900 | 16.8 | 9 | 4.0 | 200L1-2 30 | 200L2-2 37 | 225M-2 45 |
